Marking  ::  Signing

INK-JET EBS 250 HANDJET

Performance parameters

Parameter           راندمان دستگاه Value
Print height          ارتفاع چاپ   27 mm with a 16-nozzle printer

Height of objects to be labelled

ارتفاع چاپ لیبل 

from 70 mm - contact with both rolls,
from 35 mm - contact with the lower roll only to print with, for example, only 7 nozzles.
A guide and rolls can be used optionally to support rectilinear printing; they are most useful for line printing, for labelling pipes, barrels and other cylindrical objects.
Working position of the printer

قابلیت چاپ بر روی اجسام

any
Nozzle diameter

اندازه نازل

150µm as standard,
120µm, 170µm, 200µm optionally
Number of vertical rows printed at the same time

 

1
Maximum number of characters per text

حداقل تعداد حروف

1300 (along with control characters, if the printer’s built-in fonts are used)
Number of texts and print parameters sets stored in the printer’s memory at the same time

مقدار حافظه حروف

from 1 to 10; texts are loaded into the printer via a PC
Special characters

حروف مخصوص

Diacritical national characters, graphics characters for information, warning, handling or other purposes
Variable fields  

فیلد متغیر

Date and time in any format, including expiry date/period of service, incremental or decremental counters, universal counter (of subassemblies, pallets, meters, etc.)
Editing texts and print parameters, printer control

محیط تصحیح حروف

IBM-compatible PC communicating with the printer via a cordless/radio line (within the distance of 50 m),
Recommended minimum PC requirements:

حداقل سیستم ÷یشنهادی

IBM-compatible PC, equivalent to Pentium 200, 32 MB RAM, 20 MB of free space on HDD,
EBS-250 printer control program version 1.5 or later installed, to be run under one of the following operating systems Windows® 98SE/ME/NT/2000/XP/Vista®,
(!) If Windows NT® is running on your PC, the printer communicates with the PC exclusively via an RS-232 interface (not via USB).
the possibility of grouping up to 60 printers into a network which is radio-controlled with the use of a PC or radio terminal.

Timing

زمان

Either synchronised with rotational speed of the lower guide roll or at time intervals by an internal generator regardless of the printer travel rate during printing.
Power supply

Approximate operating time when the battery is fully charged


Charging





With built-in batteries,

50 hours of non-stop printing at the temperature of 20°C, automatic low battery indication,

Automatically via an external DC 24V, 1 A power pack,
Charging time - less than 150 minutes (< 2.5 h),
Number of charging cycles: 500 (up to 70% of initial capacity)
Ink      جوهر

Container capacity    ظرفیت
Available in easily detachable containers with bayonet fixing. It is made on the basis of alcohol, acetone or water, in various colours (among others in white, yellow, blue, green, red or black) to be ordered from catalogue.
110 ml is enough to print about 100 000 characters with 7x5 pix matrix or about 17 000 characters for 16x10 pix matrix.
Working temperature range

درجه حرارت محیطی

from +5°C to +40°C
Storage temperature range (over a longer period)

درجه حرارت محیطی متوسط

from +1°C to +45°C if water-based ink is used for printing,
from -10°C to +45°C if acetone or ethanol-based ink is used for printing.
Dimensions in vertical position
(length / width / height)

ابعاد دستگاه


240 / 130 / 265 mm

Weight

وزن

980±10 g - the printer with a battery and full ink container, without a power pack and cable.

 

چاپگر جوهر افشان قابل حمل